Frigidaire Microwave Repair

Microwave Repair, Done Right the First Time

A Frigidaire over-the-range microwave works as both a microwave and a vent hood, so a failure can mean no heat, a door switch that stops it from starting, or a fan and light that quit — and the high-voltage parts inside are strictly a job for a technician.

Frigidaire sells over-the-range and countertop microwaves, plus built-in microwave options in some lines. Over-the-range units are the most involved to service because they also serve as the range hood: besides the magnetron, high-voltage diode, capacitor and door switches, they have a vent fan, a cooktop light and a heat sensor.

A microwave that runs without heating, keeps blowing a fuse or will not start with the door closed usually has one failed part in the high-voltage circuit or the door-switch set. We diagnose it on site, discharge the high-voltage section safely, and take care with the cabinet and venting around over-the-range units.

Common Microwave Problems

01

Microwave runs but the food stays cold

02

Unit will not start even with the door fully closed

03

Sparks or arcing inside the cavity

04

Vent fan or cooktop light not working

05

Turntable not rotating

06

Keypad buttons not responding

Microwave Error Codes

Recognize a code on your display? Look it up before you unplug anything or attempt a repair.

See all Error Codes →

Popular Frigidaire Microwave Models

Why Trust Us With Your Frigidaire Microwave

  • Tested, Not Guessed | We test the suspected microwave part before recommending a replacement.
  • Parts for Popular Models | Common microwave parts for popular Frigidaire models travel with our technicians; less common parts are ordered and the return visit is scheduled.
  • Safety Comes First | Power, water and gas are shut off before we work on your microwave, and high-voltage parts are handled only by the technician.
  • Warranty-Aware Advice | If your microwave may still be under manufacturer coverage, we tell you so you can check that option first.
FAQ

Microwave Repair FAQ

No. A microwave contains a high-voltage capacitor that can hold a dangerous charge even after it is unplugged. Owner-level checks stop at the outlet, the breaker, whether the door closes fully and whether the turntable is seated correctly.

Stop the microwave, unplug it or switch off its breaker, and do not run it again until it has been inspected. Metal trim on a dish or foil can cause sparks, but so can a damaged waveguide cover or another internal fault.

On many over-the-range models, yes: the fan starts automatically when the microwave senses heat rising from the cooktop below, to protect its own controls. If the fan keeps running when the cooktop is off and cool, the sensor or control should be checked.

Need a repair? We're ready to help. Call Now
Call Us Schedule