What E10-E12 Means
E10, E11 and E12 on Frigidaire electronic-control dryers are electronic control board communication errors, as listed by Appliance Aid. On models without a digital display, the code is shown by flashing indicator lights rather than letters.
Common Causes of E10-E12
- Loose harness between control boards
- Control board fault
- Power surge
🔧 One Safe Check You Can Try
Unplug the dryer (or switch off its breaker) for 5 minutes, then restore power and start a short cycle. If the code comes back, book service.
⚠ Why You Shouldn't Go Further Than That
- Control board access is under the top or console panel, close to 240V wiring on electric models.
- Damage caused during a repair attempt may not be covered by your warranty — check your warranty terms first.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.