What E24 / E25 Means
E24 and E25 on Frigidaire electronic-control dryers are thermistor errors — the temperature sensor reading is open or shorted. On models without a digital display, the code is shown by flashing indicator lights rather than letters.
Common Causes of E24 / E25
- Failed exhaust thermistor
- Broken wire or connector
- Control board input fault
🔧 One Safe Check You Can Try
Unplug the dryer or switch off its breaker (and on gas models, leave the gas alone). Clean the lint screen. Restore power and run a timed dry. If the code returns, book service.
⚠ Why You Shouldn't Go Further Than That
- The thermistor is mounted on the blower housing inside the cabinet near the heating system.
- Temperature control is a safety function in a dryer, so a sensor fault needs proper repair.
- Damage caused during a repair attempt may not be covered by your warranty — check your warranty terms first.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.