What i50 Means
i50 on a Frigidaire dishwasher points to a problem with the wash (circulation) motor or drain motor circuit — the control is not seeing the motor run as expected.
Common Causes of i50
- Wash motor failing or seized
- Object jamming the pump impeller
- Drain motor failure
- Wiring or motor control fault on the board
🔧 One Safe Check You Can Try
Cancel the cycle, then turn the breaker off for about 3 minutes and back on as a reset. Check that the filter is clean and nothing is jammed in the sump, since an obstruction can stall a pump. If i50 appears again, leave the breaker off and book service.
⚠ Why You Shouldn't Go Further Than That
- The motors sit under the tub with water seals that must be reassembled correctly or they leak.
- Motor testing is done on live circuits, which is not safe in a wet base area.
- Damage caused during a repair attempt may not be covered by your warranty — check your warranty terms first.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.