What E3 Means
E3 on Frigidaire top-load washers with a digital display means the lid is open or the lid lock failed, according to Frigidaire.
Common Causes of E3
- Lid not fully closed
- Washer not level
- Failed lid lock
- Control board fault
🔧 One Safe Check You Can Try
Close the lid completely and make sure no clothing is caught at the edge. Frigidaire also recommends confirming the washer is level, since an unlevel cabinet can stop the lid from locking. If the lid still does not lock when the cycle starts, book service.
⚠ Why You Shouldn't Go Further Than That
- Frigidaire notes the lid lock or circuit board may need replacement — both are inside the console with live wiring.
- The lid lock prevents contact with a spinning basket and must not be bypassed.
- Damage caused during a repair attempt may not be covered by your warranty — check your warranty terms first.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.